Hello (encrypted)
This ASM implements the Project 25 OTAR Hello message.
Usage Notes
- This message is sent from either the Mobile Radio (MR) or the Key Management Facility to provide simple identification.
- This message is also sent from the MR to the Key Management Facility to request rekey.
- This message is broadcast as a non-addressed message, to reduce the message size, and to avoid issues from a relocated RSI to a different MMSI.
Version 0:
This is an RTCM compliant implementation of the Project 25 OTAR Hello.
This ASM only has an AIS Message 26 variant.
Hello (Message 26, broadcast)
|
|
|
Parameter |
# of Bits |
Description |
|
|
|
|||
|
Standard Message Header |
Message ID |
6 |
Identifier for Message 26; always 26. |
|
|
Repeat Indicator |
2 |
Indicates how many times a message has been repeated. 0 – 3; 0 = default; 3 = do not repeat any more. Set to zero (default). |
||
|
Source MMSI |
30 |
MMSI number of source station. Varies according to the transmitter ID. |
||
|
Destination Indicator |
1 |
0 = broadcast (no Destination ID field) 1 = Addressed (30 bit Destination ID field). Set to zero (broadcast). |
||
|
Binary Data Flag |
1 |
0 = unstructured binary data (no Application Identifier bits used) 1 = binary data coded as defined by the 16-bit AI. Set to 1 (structured). |
||
|
Destination ID |
0 |
MMSI number of destination station. Not used. |
||
|
Spare |
0 |
Not used. |
|
|
Binary Data |
DAC |
10 |
Designated Area Code. Set to 366. |
||
|
Function Identifier |
6 |
Function identifier. Set to 23. |
||||
|
KMM Preamble |
Reserved |
3 |
Reserved for future use. Set to 0. |
|||
|
Version |
5 |
Version of KMM Preamble Message Body. Set to 0. |
||||
|
MFID |
8 |
Manufacturer’s ID, indicates conformance to standard. Set to 0. |
||||
|
Algorithm ID |
8 |
Identifies the algorithm used to encrypt payload. Set to (hex) 85 = AES-128. |
||||
|
Key ID |
16 |
Identifies the TEK used to encrypt the KMM. |
||||
|
Message Indicator |
72 |
Provides the message indicator to synchronize the encryption of the OTAR KMM |
||||
|
Encrypted Payload |
OTAR Message ID |
8 |
Identifies the Project 25 “Message ID” type. One of 255 possible values assigned as the message type. Set to (decimal) 7 = Hello |
|||
|
Message Length |
16 |
A 16 bit binary number that defines the length (in octets) of the subsequent OTAR fields, including MAC. Set to (decimal) 8. |
||||
|
Message Format |
RSP |
2 |
Response Kind defines acknowledgment to be returned to the sender of the KMM. 00 =Rsp Kind 1, 01 = Rsp Kind 2, 10 = Rsp Kind 3 and 11 is undefined. |
|||
|
MN |
2 |
Message Number defines the size of the Message Number field in the KMM. 00 = no message number, 10 = a 2 octet message number. Set to (binary) 00 |
||||
|
MAC Processing |
2 |
Defines the type of MAC processing performed over the entire KMM. Set to (binary) 00 = No MAC |
||||
|
Spare |
1 |
Always zero. |
||||
|
Done |
1 |
Indicates if subsequent KMM messages are expected. 1=NOT DONE (more to follow), 0=DONE=default. |
||||
|
Destination RSI |
24 |
Radio Set Identifier number |
||||
|
Source RSI |
24 |
Radio Set Identifier Number |
||||
|
Hello Flag |
8 |
(hex) 00 = Identification Only, (hex) 01 = Rekey Request (UKEK exists) (hex) 02 = Rekey request (UKEK does not exist), (hex) 03-FF = Reserved. |
||||
|
Encryption Bit Padding |
40 |
Sufficient spare bits to ensure that the binary data is a multiple of 128 bits for block encryption (128). Set to zero. |
||||
|
Checksum |
16 |
16-bit CRC calculated as per EAIS Specification |
||||
|
Footer |
Spare |
4 |
Four extra bits to ensure the message ends on a byte boundary. Set to zero. |
|||
|
Communications State Selector |
1 |
0 = SOTDMA communication state follows 1 = ITDMA communication state follows |
||||
|
Communications State |
19 |
SOTDMA communication state (see ITU 1371-5 § 3.3.7.2.1, Annex 2), if communication state selector flag is set to 0, or ITDMA communication state (§ 3.3.7.3.2, Annex 2), if communication state selector flag is set to 1. |
||||
|
Total bits |
336 |
2 Slot Binary Message |
||||
