Text description

Introduction/Additional information:

14.1 This message provides a text description in combination with other AIS Application-Specific Message.

14.2 This message can be broadcast or addressed, but must be the same as the main message that it is linked to.

14.3 The Message Linkage ID is used to link the Text Description message to another AIS Application-Specific Message (e.g., Area Notice or Route Information). The same source MMSI must be used to send both the main message and Text Description message.

14.4 Up to 5-slot messages can be created, however messages greater than 3 slots should be avoided.

Permitted as from:

01/06/2010

Registrant:

IMO Circ. 289

Physical link:

AIS

Message number (0=VDES-VDE):

DAC or VPFI:

FI / Message ID:

State:

in force

Number of slots (max):

Last modified:

29/01/2021 - 23:18

Details:

Table 14.3

Text description - (broadcast)

Parameter	No of bits	Description
Message ID	6	Identifier for Message 8; always 8.
Repeat Indicator	2	Used by the repeater to indicate how many times a message has been repeated. 0 - 3 0 = default 3 = do not repeat anymore
Source ID	30	MMSI number of source station.
Sequence Number	2	0 - 3; refer to § 5.3.1, Annex 2 of ITU-R M.1371-3.
Destination ID	30	MMSI number of destination station.
Retransmit Flag	1	Retransmit Flag should be set upon retransmission. 0 = no retransmission = default 1 = retransmitted
Spare	1	Not used. Set to zero.
IAI	16	DAC = 001; FI = 29 (See Rec. ITU-R M.1371-3, Annex 5, § 2.1.
Message Linkage ID	10	Used to link the Text Description message with a main message. The Connection ID and source MMSI MID uniquely identifies the main message. 1 - 1,023 0 = not available = default
Text String	6 - 966	Free text 1 - 155 characters 6-bits ASCII). If applicable, recommended to use IMO Standard Marine Communication Phrase (SMCP) (see IMO A.918(22)). Number of slots used should be minimized, refer to Table 14.4.
Spare	0	Not used. Set to zero.
Total	72 - 1032	Occupies 1 - 5 slots (see Table 14.4).

Table 14.4

Number of slots if sent as an addressed message

Number of characters in the message	1-6	7-43	44-81	82-118	119-155
Number of slots used	1	2	3	4	5